Skip to content
DAP CA-4500 DSP 4x500 W

DAP CA-4500 DSP 4x500 W

by Events Gear
£710.00 - £710.00
£710.00
£710.00 - £710.00
£710.00
Availability:
In stock

Compact 4-channel amplifier (4x 500 W) - DSP driven

  • Suitable for the installation market (70/100 V)
  • Powerful digital DSP
  • Bridge and stereo mode
  • SMPS & Class D technology
  • OLED display and PC configurable

The DAP CA-4500 DSP is a high power digital 4-channel amplifier with 500 W in 4 Ohm and four 500 watt speakON outputs. It can drive a 70/100 V speaker system and can deliver two channels of 1000 watt each in bridge mode. This amplifier is especially suitable for the installation market.

The CA-4500 includes a powerful DSP. All parameters, such as 8-band EQ settings, delay, compression, noise gate and more, are configurable manually or via included software on any Windows PC/laptop. Besides, all four inputs and output channels are freely routable.

This amplifier not only has many functionalities but is also safe to use thanks to advanced protection circuits, such as soft start technology and a clip limiter. All of this fits in a compact 19-inch design with a 1 unit height.

Mechanical Specifications

Amplifier Airflow - Front to back
Amplifier Cooling - Radial Fan
Height (mm) - 44 mm
Width (mm) - 483 mm
Length (mm) - 285 mm
Installation Depth (excl. connector) - 285 mm
Flightcase Size - 19"
Rack Units - 1 U
Housing - Metal
Colour - Black
Finish - Powder Coating
Weight - 5.9 kg
IP Rating - IP20 (indoor use only)


SKU D4515
Outputs
2 Ohms Stable
No
Output per channel into 8 ohms at 1 kHz
250 W
Output per channel into 4 ohm at 1 kHz
500 W
Bridge Output into 8 ohms at 1 kHz
1000 W
Output per channel into 8 ohm at 20 Hz > 20 kHz
250 W
Output per channel into 4 ohm at 20 Hz > 20 kHz
500 W
Bridge Output 8 ohm on 20 Hz > 20 kHz
1000 W
Bridge Output 100V
1000 W
Output Channels
4
Output Gain
34 dB
Output Mode
4-channel, Bridge, Mono, Stereo
Output Connector
Speaker Connector 4 pole
Inputs
Mono Inputs
4
Mono Input Connector
3-pin XLR
Mono Input Impedance
20 Ω
Mono Unbalanced Input Sensitivity
1 dBv
Audio Specifications
THD Level
< 0.15 %
Signal-to-noise Ratio
> 96 dB
AD/DA Convertor Sample Rate
96 kHz
Audio Latency
1.5 ms
SLEW Rate
25 V/μs
Amp Technology
Class D
Damping Factor
180 :1
Crosstalk
60 dBu
Frequency Response Minimum
20 Hz
Frequency Response Maximum
20000 Hz
Software Specifications
Supported Operating Systems - Windows
Sound Editing
Parametric Input Equalizer
8 Bands
Parametric Output Equalizer
8 Bands
Equalizer Types Input
Bell, High Shelf, Low Shelf, Notch
Equalizer Types Output
High Shelf 6, High Shelf 12, Low Shelf 6, Low Shelf 12
Crossover Filter Types
Bessel, Butterworth, Linkwitz Riley
Crossover Slopes
6, 12, 18, 24, 30, 36, 42, 48 dB
Dynamics Type
Compressor, Gate, Limiter
Phase Reverse
Yes
Internal Storage

User Presets - Yes

Control and Programming
Control Mode
Manual, PC Software
Display
OLED
Electrical Specifications and Connections
Power Supply
220V-240 VAC 50 Hz
SMPS Included
Yes
Power Consumption
1741 W
Fuse
10 A
Power Connector in
IEC
Data Connector in
USB
Product Properties
Handles
No
Electronic Protection
Clip limiter (fixed), DC voltage, Overheat, Overload, Short circuit, Softstart, Thermal
Included Items
Included Cables
IEC cable
Included Accessories
Rubber feet, User Manual
Manuals