Skip to content
DAP HP-500 2x200 W

DAP HP-500 2x200 W

by Events Gear
£290.00 - £290.00
£290.00
£290.00 - £290.00
£290.00
Availability:
In stock

2x 200 W - bridge, parallel and stereo mode

  • Class AB amplifier
  • Efficient forced air cooling
  • Bridge, parallel and stereo mode
  • Full protection circuits
  • 19" / 2U design

The DAP HP-500 is a simple yet effective and safe 2x 200 watt amplifier with bridge, parallel and stereo mode, suitable for audio installations at public places, such as clubs, bars and other small venues. Its output is sufficient for everyone to sing along and dance to their favorite tunes.

The HP-500 is safe to use since it is protected from clipping, overloading and overheating. It can be built into a 19-inch rack or case and has a 2 unit height. Rubber feet are included for placement on a cabinet. A power cable is also included.

SKU D4175
Outputs
2 Ohms Stable
No
Output per channel into 8 ohms at 1 kHz
150 W
Output per channel into 4 ohm at 1 kHz
200 W
Bridge Output into 8 ohms at 1 kHz
400 W
Output per channel into 8 ohm at 20 Hz > 20 kHz
150 W
Output per channel into 4 ohm at 20 Hz > 20 kHz
200 W
Bridge Output 8 ohm on 20 Hz > 20 kHz
400 W
Output Channels
2
Output Gain
32 dB
Output Mode
Bridge, Parallel, Stereo
Output Connector
Speaker Connector 4 pole
Inputs
Mono Inputs
2
Mono Input Connector
3-pin XLR
Mono Input Impedance
20 Ω
Mono Balanced Input Sensitivity
1 dBu
Audio Specifications
THD Level
< 0.5 %
Signal-to-noise Ratio
> 100 dB
SLEW Rate
10 V/μs
Amp Technology
Class AB
Damping Factor
100 :1
Crosstalk
75 dBu
Frequency Response Minimum
10 Hz
Frequency Response Maximum
20000 Hz
Electrical Specifications and Connections
Power Supply
220V-240 VAC 50 Hz
SMPS Included
No
Power Consumption
325 W
Fuse
3 A
Power Connector in
IEC
Mechanical Specifications
Amplifier Airflow
Front to side
Amplifier Cooling
Axial fan
Height (mm)
88 mm
Width (mm)
483 mm
Length (mm)
310 mm
Installation Depth (excl. connector)
310 mm
Flightcase Size
19"
Rack Units
2 U
Housing
Metal
Colour
Gray
Finish
Powder Coating
Weight
8.7 kg
IP Rating
IP20 (indoor use only)
Product Properties
Handles
No
Electronic Protection
Clip limiter (fixed), DC voltage, Overheat, Overload, Short circuit, Softstart, Thermal
LED Indicators
Clip, Protect, Signal
Included Items
Included Cables
IEC cable
Included Accessories
Rubber feet, User Manual
Product files and software
Manuals