Skip to content
DAP Qi-4400 4x400 W

DAP Qi-4400 4x400 W

by Events Gear
£410.00 - £410.00
£410.00
£410.00 - £410.00
£410.00
Availability:
In stock

4x 400 W - for Xi installation speakers

  • Perfect sound quality and long lifespan
  • Robust steel 19" / 1U housing
  • Suitable for either mobile and installation speakers
  • Bridge and stereo modus
  • SMPS, Class D amplification & Soft Start technology

The DAP Qi-4400 is a 4x 400 watt amplifier suitable for the DAP-Xi speaker range. It can also be applied for mobile use due to its rugged steel housing. Each of its four channels has its own gain control and protect, limit and signal indicator LEDs.

The Qi-4400 has 4 routable XLR inputs and speakON outputs. They can be set in either bridge and stereo mode. Equipped with SMPS and Class D amplification, it is a lightweight and energy efficient solution delivering a high quality sound signal.

This device is save to use thanks to its advanced protection circuit. It is protected from overload, overheat and clipping due to various built-in protection mechanisms, such as a softstart and clip limiter. Furthermore, the Qi-series is made with high-quality low-deviation components to ensure a long lifespan and a perfect sound quality.

SKU D4531
Outputs
2 Ohms Stable
No
Output per channel into 8 ohms at 1 kHz
250 W
Output per channel into 4 ohm at 1 kHz
400 W
Bridge Output into 8 ohms at 1 kHz
800 W
Output per channel into 8 ohm at 20 Hz > 20 kHz
250 W
Output per channel into 4 ohm at 20 Hz > 20 kHz
400 W
Bridge Output 8 ohm on 20 Hz > 20 kHz
800 W
Output Channels
4
Output Mode
4-channel, Bridge, Stereo
Output Connector
Speaker Connector 4 pole
Inputs
Mono Inputs
4
Mono Input Connector
3-pin XLR
Mono Balanced Input Maximum Level
20 dBu
Mono Input Impedance
20 Ω
Mono Unbalanced Input Sensitivity
1 dBv
Audio Specifications
THD Level
< 0.5 %
Signal-to-noise Ratio
> 90 dB
SLEW Rate
20 V/μs
Amp Technology
Class D
Damping Factor
200 :1
Frequency Response Minimum
10 Hz
Frequency Response Maximum
20 Hz
Electrical Specifications and Connections
Power Supply
100-240 VAC 50-60 Hz
SMPS Included
Yes
Power Consumption
875 W
Power Connector in
IEC
Mechanical Specifications
Amplifier Airflow
Front to back
Amplifier Cooling
Axial fan
Height (mm)
44 mm
Width (mm)
483 mm
Length (mm)
390 mm
Installation Depth (excl. connector)
390 mm
Flightcase Size
19"
Rack Units
1 U
Housing
Metal
Colour
Black
Finish
Powder Coating
Weight
5.8 kg
IP Rating
IP20 (indoor use only)
Product Properties
Electronic Protection
Clip limiter (fixed), DC voltage, RF, Short circuit, Softstart, Thermal
LED Indicators
Clip, Power, Protect, Signal
Included Items
Included Cables
IEC cable
Included Accessories
Rubber feet, User Manual
Product files and software
Manuals